An Australian Industry Leader in Irrigation & Garden Design

Rain Bird PGA Series Solenoid Valves

Rain Bird PGA Series Solenoid Valves

$76.25$106.40

Built for high-end residential and light commercial applications, Rain Bird® PGA series valves are the toughest, most reliable valves in their class. These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure. For maximum peace of mind, PGA series valves also offer a best-in-class, three-year trade warranty. .

Categories: , , Brand: Rain BirdMPN: PGAWarranty: 3 Years

Description

Built for high-end residential and light commercial applications, Rain Bird® PGA series valves are the toughest, most reliable valves in their class. These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure. For maximum peace of mind, PGA series valves also offer a best-in-class, three-year trade warranty. .

Extreme Durability
The PGA valve maintains a strong, worry-free seal between the body and bonnet, no matter the conditions. In Thermal Cycle Testing, hundreds of PGA valves were exposed to extreme temperature swings and intense pressures. The result—zero leaks.*

Features

Reliability

  • Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions.
  • Robust construction and electrical design for quiet performance you can count on.
  • Rugged PVC and glass-filled nylon construction for reliable operation.
  • Normally closed, forward flow design.
  • Filtered pilot flow to resist debris and clogging.
  • Slow closing to prevent water hammer and subsequent system damage.
  • Three-year trade warranty.

Ease of Use

  • Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance.*
  • Globe and angle configuration for flexibility in design and installation.
  • Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller.
  • One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
  • Non-rising flow control handle adjusts water flow as needed.

*Currently available on 2” PGA models only.

Brochure

Manual

Specs

  • Pressure: 15 to 150 psi (1,04 to 10,4 bar)
  • Flow without PRS-D option: 2 to 150 gpm (0.45 to 34.05 m³/h; 7.8 to 568 l/m)
  • Flow with PRS-D option: 5 to 150 gpm (1.14 to 34.05 m³/h; 19.2 to 568 l/m)
  • Water temperature: Up to 110°F (43°C) – Refer to chart in photo section above
  • Ambient temperature: Up to 125°F (52°C)

Electrical Specifications

  • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement
  • Inrush current: 0.41A (9.9VA) at 60Hz
  • Holding current: 0.14A (3.43VA) at 60Hz
  • Solenoid coil resistance: 30-39 Ohms, nominal

Dimensions

  • 100-PGA: 7¼” x 5½” x 3¼” (18,4 cm) x (14,0 cm) x (8,3 cm)
  • 150-PGA: 8″ x 6¾” x 3½” (20,3 cm) x (17,2 cm) x (8,9 cm)
  • 200-PGA: 10″ x 7¾” x 5″ (25,4 cm) x (23,5 cm) x (12,7 cm)Note: The PRS-D option adds 2″ (5,1 cm) to the valve height

Reviews

There are no reviews yet.

Be the first to review “Rain Bird PGA Series Solenoid Valves”

Your email address will not be published. Required fields are marked *

Go to Top