The RAINSAVERMK6 is an Automatic Rainwater / Mains Water Changeover Device designed to provide automatic mains back up for Pressure Pump supply systems. The RAINSAVERMK6 is designed to be installed in conjunction with a Pressure Pump supply system that is fitted with an independent pressure and flow controller with loss of prime protection and 24 hour auto restart.
The pump is a self-priming pressure system pump supplied wired and ready to install. The self-priming ability provides excellent suction capacity. Used especially for supplying water to domestic installations.
Rainsaver MK6 General Specifications:
Maximum water temperature (mains + pump): 40°C
Maximum recommended continuous pump flow: 120 l/m
Maximum recommended pump pressure: 1000 kPa
Maximum recommended mains inlet pressure: 1000 kPa
No need for float switch.
2 year Rainsaver MK6 warranty, see installation and operating
manual for details
WaterMark Level 1 Certification to
ATS5200.477:2006, License No. 23022.
The pump is characterised by:
• Automatic electronic control provides run dry protection
and constant pressure at low flows. Automatic electronic
control has in-built check valve & auto restart.
• Corrosion resistant pump body, diffuser and impeller.
• Mechanical shaft seal.
• 240V single phase TEFC motor with in-built auto reset