-
A PVC Pressure Coupling joins two pieces of the same size pressure pipe together. It can be used to extend existing pipe length or to repair a broken pipe. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
PTFE tape can be used on pipe made from galvanised steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS or fibreglass. -
A PVC Pressure Cap fits on the end of a standard pressure pipe to form an end seal. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Valve Socket is pushed over pressure pipe and glued into place. It is used to attach a solenoid valve to an irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC 90° Elbow joins two pieces of the same size pressure pipe at an angle of 90°. Use to re-direct the pipeline and to assist in turning corners. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC 90º Faucet Elbow is used to attach a riser or a sprinkler to the end of an irrigation line. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Faucet Tee joins the same size pressure pipe with a female BSP thread intersecting to form a T junction. Use to attach sprinklers or valves into an irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Reducing Bush is installed into a fitting to allow smaller size pressure pipe to fit into the fitting and join into the irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Elbow 45° joins two pieces of the same size pressure pipe at an angle of 45°. Use to re-direct the pipeline and to assist in turning corners. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Barrel Union is used to break the line and allow access for maintenance. The locking nut can be unscrewed to allow a section of pipe or a fitting to be removed. Often a barrel union is used in front of a check valve or a pump to isolate it and to have the ability to break the line. Commonly used in irrigation or pool applicationsWatermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Faucet Socket is pushed over pressure pipe and glued into place. This allows you to add a female threaded end to your irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Tee joins three pieces of the same size pressure pipe to form a T junction. It can be used to re-direct the pipeline and to turn corners within an irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard.
