The Beeco high hazard RPZ is designed with ease of access in mind and with very few spare parts needed, the modular design makes MAG-BEECO valves the easiest and quickest valve to perform your mandatory yearly recertification on.
MAG Beeco Reduced Pressure Zone Device (RPZ) with Strainer & Ball Valves
$412.00 – $1,019.00
Description
The Beeco high hazard RPZ is designed with ease of access in mind and with very few spare parts needed, the modular design makes MAG-BEECO valves the easiest and quickest valve to perform your mandatory yearly recertification on. Comes complete with strainer and tested ball valves.
APPLICATIONS
- For installation on potable water lines
- Protects against back siphonage and back pressure
- Maximum protection in High Hazard applications
FEATURES AND BENEFITS
- Fewer parts needed – save money
- Servicing ability and commissioning is easy, simple and cost effective
- Easy Repair: Checks are designed with a unique thumb screw holding in the disc to allow for easy removal with a simple pair of pliers dramatically reducing part breakage during repair
- Ease of access means lower maintenance costs – saving time and money
- Single threaded cover enables quick access inside the valve
- Repair parts are modular – only takes two relief valve kits and three check repair kits to cover all sizes
- Entire valve can be fully serviced inline – lightweight short lay length modular design makes valve easy and quick to service
- Sizes: l5mm to 50mm device
-
- Maximum working pressure: 1200kPa
- Maximum working temperature: 82°C
- Relief valve port independent of check valves
- NorylTMReplacement check valvesBody: Brass
- Relief valve port independent of check valves
- Hydrostatic test pressure: 2400kPa
- 300 series stainless steel springs
INSTALLATION
Unless otherwise specified, install device at a minimum of 300mm above adequate drain with sufficient clearance for testing and maintenance.
- NorylTMReplacement check valves
- Relief valve port independent of check valves
- Maximum working pressure: 1200kPa
- Maximum working temperature: 82°C
- Hydrostatic test pressure: 2400kPa
- 300 series stainless steel springs
INSTALLATION
Unless otherwise specified, install device at a minimum of 300mm above adequate drain with sufficient clearance for testing and maintenance.
Additional information
| Weight | 3 kg |
|---|---|
| Dimensions | 30 × 20 × 10 cm |
| Options | Beeco 20mm RPZ with Strainer & Tested Ball Valves, Beeco 25mm RPZ with Strainer & Tested Ball Valves, Beeco 32mm RPZ with Strainer & Tested Ball Valves, Beeco 40mm RPZ with Strainer & Tested Ball Valves, Beeco 50mm RPZ with Strainer & Tested Ball Valves |
Reviews
There are no reviews yet.