The Beeco high hazard RPZ is designed with ease of access in mind and with very few spare parts needed, the modular  design makes MAG-BEECO valves the easiest and quickest valve to perform  your mandatory  yearly recertification on.
MAG Beeco Reduced Pressure Zone Device (RPZ) with Strainer & Ball Valves
$412.00 – $1,019.00
Description
The Beeco high hazard RPZ is designed with ease of access in mind and with very few spare parts needed, the modular  design makes MAG-BEECO valves the easiest and quickest valve to perform  your mandatory  yearly recertification on. Comes complete with strainer and tested ball valves.
APPLICATIONS
- For installation on potable water  lines
- Protects against back siphonage  and back pressure
- Maximum protection  in High  Hazard applications
FEATURES AND BENEFITS
- Fewer parts needed – save money
- Servicing ability and commissioning  is easy, simple  and cost effective
- Easy Repair: Checks are designed with a unique  thumb  screw holding  in the disc to allow for  easy removal with  a simple  pair of pliers dramatically  reducing  part breakage  during  repair
- Ease of access means lower maintenance costs – saving time  and money
- Single threaded cover enables quick access inside the valve
- Repair parts are modular – only takes two relief valve kits and three check repair  kits to cover all sizes
- Entire valve can be fully serviced inline – lightweight  short  lay length  modular  design  makes valve easy and quick  to service
- Sizes: l5mm to 50mm device
-
- Maximum working pressure: Â 1200kPa
- Maximum working temperature:   82°C
- Relief valve port independent  of check valves
- NorylTMReplacement check valvesBody: Brass
- Relief valve port independent  of check valves
- Hydrostatic test pressure: Â 2400kPa
- 300 series stainless steel springs
INSTALLATION
Unless otherwise  specified,  install device  at a minimum  of 300mm  above adequate  drain with  sufficient clearance for testing  and maintenance.
- NorylTMReplacement check valves
- Relief valve port independent  of check valves
- Maximum working pressure: Â 1200kPa
- Maximum working temperature:   82°C
- Hydrostatic test pressure: Â 2400kPa
- 300 series stainless steel springs
INSTALLATION
Unless otherwise  specified,  install device  at a minimum  of 300mm  above adequate  drain with  sufficient clearance for testing  and maintenance.
Additional information
Weight | 3 kg |
---|---|
Dimensions | 30 × 20 × 10 cm |
Options | Beeco 20mm RPZ with Strainer & Tested Ball Valves, Beeco 25mm RPZ with Strainer & Tested Ball Valves, Beeco 32mm RPZ with Strainer & Tested Ball Valves, Beeco 40mm RPZ with Strainer & Tested Ball Valves, Beeco 50mm RPZ with Strainer & Tested Ball Valves |
Reviews
There are no reviews yet.