The Bianco Inox with Aquasaver is a complete pumping and mains solution. It comes complete with a Bianco INOX60 Pressure Pump & Controller, Maxisave 3/4 inch full flow main to tank water change over valve.
Theses pumps are a self-priming surface mounted pressure system pump supplied with plug and play leads (IEC type). The self-priming ability provides excellent suction capacity of up to 9m. Used especially for supplying water to domestic installations.
The pump is characterised by:
- Automatic electronic pump control fitted and wired with plug and play leads so a licensed electrician is not required during installation.
- Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
- Run dry protection to prevent pump damage
- Automatic electronic control has in-built check valve to prevent water backflow through the pump.
- 2.2bar pump cut in for greater versatility.
- Corrosion resistant pump body, diffuser and impeller to ensure pump durability
- High quality mechanical shaft seal and high quality bearings
- 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
40G: 50lpm/Max Press 370kpa
60S: 57lpm/Max Press 420kpa
90S: 68lpm/Max Press 460kpa
The AcquaSaver® Valve is a fully automatic adjustable mechanical rainwater/mains water changeover device designed for pressure pump supply systems for harvesting rainwater for the toilet, laundry and household applications with automatic mains backup.
It is suitable for up to 2 toilets and washing machine in a single story house and irrigation systems.
- Easy to install
- Patent design
- Adjustable mains pressure
- Does not require maintenance
- No electrical consumption – No electronic components
- Solid brass construction – Fully weatherproof – Built to last
- Suitable for any pressure pump with sufficient head pressure
- Can be mounted in any position
- Built-in dual check valve for backflow prevention
- 2 Year warranty
|Max Mains Pressure||500 KPa|
|Max Pump Pressure||600 KPa|
|Min Pump Pressure||300 KPa|
|Max Flow Rate||50 LPM|
|Max Water Temperature||40 C|
|Min Water Temperature||0 C|
|Pump Inlet||25mm 1” BSP F|
|Mains Water in||20mm 3/4” BSP F|
|Outlet||20mm 3/4” BSP|