Australia’s Irrigation & Garden Enhancement Specialists

cropped MIS Irrigear Master
Aesthetic Twitter Header
Menu
  • 240V, 1ph, 10A max, 1.1kW, 1.5hp, IP65, Ports 1” BSPM Adjustable cut in pressure setting range 1.5 - 3.0 bar. Min pump pressure 300-470kPa.
    Features
    AUTO RESTART ADJUSTABLE AUTOMATIC PUMP CONTROLLER PLUG AND PLAY with round 3 pin socket and pressure gauge. The pressure gauge can be mounted on the left or right hand side.
    Add to cart Add to cart Details
  • High quality electric float with with 15mt of PVC cable. Can be uses on low voltage or 240 volt systems. This float with comes with a piggy back plug for easy installation. It can also be used as an open or closed circuit switch. This switch is widely used in tank top up situations.  
    Add to cart Add to cart Details
  • The White International WHI-SK10AXHS2 controllers are devices used to control electric 240V pumps of 1.5kW or less. The controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches. The unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.
    Add to cart Add to cart Details
  • Apex have designed an automatic switching device with the rain water tank industry in mind! The RainAid valve is the ideal way of controlling the backup water source (mains or other) on a rainwater collection tank. It will ensure your rainwater tank never runs completely dry in the event of demand exceeding rainfall (supply). You can easily set the valve so that it maintains a set (minimum/maximum) level of water in a tank. That level can be as low or as high in the tank as you need...letting you determine how much storage you want in reserve to catch the next inflow of rain. apex logo
    Add to cart Add to cart Details
  • Sometimes natures reserve doesn’t quite have enough to meet our every day rainwater requirements. On those occasions the Hansen Rapid-Flo Rain Relief Valve provides what’s needed. If the tanks rain water level drops below minimum, the Hansen Rapid-Flo Valve opens to supplement the tanks water from an alternative source such as the mains water supply. However it will only increase the water level by either 50 or 100mm in case it rains the next day. The Rapid-Flo Rain Relief Valve has been designed to operate as a Full Flow Valve (1275 l/min at 1,200 kpa) and features the Hansen diaphragm for soft open and close thus reducing water hammer and increasing pump and water systems life expectancy.
    Add to cart Add to cart Details
  • The Bianco SUB450 is a light duty, occasional use pump with an in-built float for use pumping clear water without solids. With its internal float mechanism and top outlet, the Sub450 is suitable for use in small or confined pump chambers (200 x 200mm). The Sub 450, once pumping, can pump down to less than 5mm when in manual mode and so is ideal for basement or garage drainage applications.  
    Add to cart Add to cart Details
  • The HYJET semi commercial range of submersible pumps are ideal for pumping rainwater, wastewater and recycled water. They feature: Cast iron pump body and impeller, Stainless steel shaft, Double seal - mechanical seal NBR ceramic / graphite with oil barrier chamber and lip seal to protect seal in event of dry running.  
    Add To Cart
    Details
  • Add to cart Add to cart Details
  • The Bianco SUB550 is a light duty, occasional use vortex style pump The generous internal clearances enable this pump to cope with lightly contaminated water containing soft solids such as leaves or other non-abrasive organic materials If you have a general de-watering task, the SUB550 is a great choice
    Add to cart Add to cart Details
  • The BIA B18VAS2-FF is a rugged vortex type drainage pump fitted with a cast iron semi vortex impeller. With a free passage of 15mm this pump is suitable for general drainage applications with clean or slightly dirty water. Fitted with a vertical ‘fixed’ float this pump is compact and suitable for use in situations where space is limited Ideal for greywater pump out, sump emptying or pumping of light slurries from cellars, ditches, pits, ponds and drains
    Add to cart Add to cart Details
  • The Bianco Series 2 Vortex Pumps are suitable for the dewatering of cellars, garages and aerated water treatment systems. Suitable for pumping both clean water and can handle soft solid particle up to 25mm.
    Add To Cart
    Details
  • The BIA B25VAS2-FF is a rugged vortex type drainage pump fitted with a cast iron semi vortex impeller. With a free passage of 15mm this pump is suitable for general drainage applications with clean or slightly dirty water.
    Add to cart Add to cart Details

Title

Go to Top