-
A PVC Pressure Coupling joins two pieces of the same size pressure pipe together. It can be used to extend existing pipe length or to repair a broken pipe. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
PTFE tape can be used on pipe made from galvanised steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS or fibreglass. -
A PVC Pressure Cap fits on the end of a standard pressure pipe to form an end seal. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Valve Socket is pushed over pressure pipe and glued into place. It is used to attach a solenoid valve to an irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC 90° Elbow joins two pieces of the same size pressure pipe at an angle of 90°. Use to re-direct the pipeline and to assist in turning corners. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC 90º Faucet Elbow is used to attach a riser or a sprinkler to the end of an irrigation line. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Faucet Tee joins the same size pressure pipe with a female BSP thread intersecting to form a T junction. Use to attach sprinklers or valves into an irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Reducing Bush is installed into a fitting to allow smaller size pressure pipe to fit into the fitting and join into the irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Elbow 45° joins two pieces of the same size pressure pipe at an angle of 45°. Use to re-direct the pipeline and to assist in turning corners. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Barrel Union is used to break the line and allow access for maintenance. The locking nut can be unscrewed to allow a section of pipe or a fitting to be removed. Often a barrel union is used in front of a check valve or a pump to isolate it and to have the ability to break the line. Commonly used in irrigation or pool applicationsWatermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Faucet Socket is pushed over pressure pipe and glued into place. This allows you to add a female threaded end to your irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Tee joins three pieces of the same size pressure pipe to form a T junction. It can be used to re-direct the pipeline and to turn corners within an irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
A PVC Pressure Valve Take Off Adaptor fits into PVC fittings and is glued into place. The fitting provides a male BSP threaded take off for a valve to be installed into an irrigation system. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
PTFE (Polytetraflouroethylene) tape is a non-adhesive tape for use with threaded fittings on all types of pipes, including gas and liquid carrying pipework, including potable water -
PTFE (Polytetraflouroethylene) tape is a non-adhesive tape for use with threaded fittings on all types of pipes, including gas and liquid carrying pipework, including potable water -
Pvc crosses are a four way slip join used to join pvc pipe. These connections must be glued. They are used in high and low pressure applications and are UV stabilsied. -
A PVC Pressure Compression Repair Coupling can be used to join various pipe materials. Suits either iron, plastic or steel pipe sizes and can attach a plastic pipe to threaded valves or fittings. Watermark Approved Fittings, manufactured to AS/NZS 1477 Standard. -
Plummas PVC Pipe Priming Fluid is a solvent based product which is specially formulated to clean and prime PVC-U pipes and fittings so they are free of dirt and grease. -
PLUMMA’S GREEN GLUE Type P is a specially formulated resin based adhesive for bonding PVC-U pipe & fittings. PLUMMA’S GREEN GLUE is slower setting than PLUMMA’S BLUE GLUE, and is suitable for Pressure applications in residential, commercial, agricultural and industrial work such as Irrigation, Reticulation, Swimming Pools & Spas and Pressurised Fluid Lines. -
Plummas PVC Pipe Priming Fluid is a solvent based product which is specially formulated to clean and prime PVC-U pipes and fittings so they are free of dirt and grease. -
RectorSeal T Plus 2 is a non-hardening thread sealant containing PTFE plus synthetic fibers. Fibers dispersed in a resinous base combined with inert mineral fillers provide maximum sealing performance. -
Pvc slip fix coupling are a telescopic repair coupling, these couplings reduce the amount of digging and fitting required to fix broken pipe work. These connections must be glued. They are used in high and low pressure applications and are UV stabilsied. -
PLUMMA’S CLEAR GLUE Type P is a specially formulated resin based adhesive for bonding PVC-U pipe & fittings. PLUMMA’S CLEAR GLUE is slower setting than PLUMMA’S BLUE GLUE, and is suitable for Pressure applications in residential, commercial, agricultural and industrial work such as Irrigation, Reticulation, Swimming Pools & Spas and Pressurised Fluid Lines. -
TITASEAL 3577 is widely used for the locking and sealing of metal threaded pipes and fittings. This anaerobic sealant cures when confined in the absence of air between close fitting metal surfaces and prevents loosening from shock and vibration.
